Pulping equipment

Bulk screening machine

Bulk screening machine use: Widely used in waste paper processing systems in the pulp and paper industry. Remove loose bags, dust, and debris from waste paper. Structural features: Most of the impurities are removed from the source to prevent them from entering the pulping system, thereby improving the quality of the pulp. After the waste paper bag is loosened, it reduces the time of pulping and soaking, improves the pulping efficiency, and saves energy by 10-20%. Frequency control, adapt to different production requirements. The spray dust removal device can effectively remove dust from waste paper and clean the environment.

D type water pulper

It is suitable for intermittent or continuous disintegration of OCC, commercial waste paper, etc. Heavy impurities are discharged in separate waste settling tanks to prevent equipment from being damaged by heavy metals and to exclude plastics.

Zhongqiang water slurry machine

use: The machine's rotary knife and fixed knife are made of special alloy steel, and the material is particularly wear-resistant.

Cylinder sieve

After the cylinder screen device is used in the pulper or the impurity separator, it is used to screen out various impurities such as plastics, rubber, sand, metal sheets and films with large geometric shapes in the waste paper pulp.

Drum hydraulic pulper

Five advantages, strong out Does not damage the fiber. The relatively soft disintegration mechanism does not damage the fiber, ensuring high quality. Does not destroy impurities, maintains the integrity of impurities, and reduces the pressure on subsequent sections Minimal supporting conditions Reduce downtime and save costs Significant energy saving Power consumption is only consumed in the rotation of the drum. It is a good 2/1/3 of the traditional hydraulic pulper. Trinity, cost saving, integrated pulping, rough selection and slag removal, greatly reducing the equipment investment of the entire pulping line

O type hydraulic pulper

use: It is used to disintegrate commercial pulp board, paper machine underage and various waste paper. Structural features: According to the different raw materials, the corresponding operation mode can be adopted and the scope of use can be wide. Specifications: 2m3~70m3 Processing capacity: 15~600TPD

High concentration hydraulic pulper

use: It is used to disintegrate waste paper in a high concentration state in the deinking process. Structural features: Compact structure and high rotational efficiency. The three-wire spiral tower type rotor can effectively promote the circulation of the slurry and enhance the friction between the pulp fibers, and can achieve mild beating in a high concentration state, and the fibers can be disintegrated without breaking impurities. Specifications: 5m3~50m3 Processing capacity: 20~360TPD

Impurity separator

Uses: Impurity separator is a device that integrates fiber disintegration and impurity separation. After the pulper (including low or high concentration continuous or batch), it is a secondary pulp separation equipment to separate light and heavy impurities in the waste pulp and disintegrate the undisintegrated paper of the hydraulic pulper.

Stranding machine

use: The rope machine is used in the hydraulic pulper. Various light impurities in the waste paper pulp, such as iron wire, plastic, cotton yarn, etc., are continuously wound to form a strand, which is removed by the pulper under the control of the stranding machine. Structural features: The wire rope machine is composed of a box body, a conveyor, a winch, a press wheel lifter and the like. The transmission consists of a motor direct-coupled two-stage reducer, a drive shaft, a bearing, and a winch. The pressure wheel elevator is composed of a cylinder, a reversing valve, a pressing wheel and a pressing arm. Twist rope speed: 0~50m/h

Cutter

use: After the cutter is installed on the stranding machine, the stranded rope of the stranding machine is cut into small sections for subsequent processing. Structural features: The cutter of the cutter is driven by a hydraulic piston, and the cutting force is large. The structure is rugged, compact and can handle heavy loads.