Product center
PRODUCTS CENTER
CONTACT US
Tel: +86-543-4505888 / +86-533-4502888
Fax: +86-543-4501399 / +86-533-4506088
Email:shuntong@sdshuntong.com
Add:Haosheng Town Industrial Park, Zouping County, Shandong Province
Gracity disc thickener
Used for washing and concentrating low concentration pulp in the pulp and paper industry.
Key words:
Category:
Concentration equipment
Support hotline:
Gracity disc thickener
Usage: Used for washing and concentrating low concentration pulp in the pulp and paper industry.
The working principle is to rely on the difference between the slurry level outside the disk filter screen and the water level inside the disk for gravity dehydration; The slurry with a concentration of 0.8-1.2% enters the slurry tank and is adsorbed on the fan disk. The white water inside the disk flows from the drainage ditch to both ends of the hollow shaft and is discharged from the wall panel. The disk slurry is washed and peeled off by high-pressure water. When the slurry level is higher than the regulating valve gate, it overflows into the slurry discharge tank and is discharged, with a slurry concentration of about 3-6%. The pulp concentration and production capacity can be adjusted by the rotation speed of the spindle.
Structural characteristics
High production efficiency and small footprint.
The fan disc is welded from stainless steel and has good corrosion resistance.
Due to the fan-shaped structure of the dehydration tray and its large filtration area, a large amount of white water can be filtered during operation, resulting in a lower concentration of white water released compared to the circular mesh thickener.
Main technical parameters
|
MODEL |
ZNP2510 |
ZNP2512 |
ZNP2514 |
ZNP2516 |
ZNP3510 |
ZNP3512 |
ZNP3514 |
ZNP3516 |
ZNP3518 |
|
Diameter of disc(mm) |
2500 |
2500 |
2500 |
2500 |
3500 |
3500 |
3500 |
3500 |
3500 |
|
Number of disc(n) |
10 |
12 |
14 |
16 |
10 |
12 |
14 |
16 |
18 |
|
Nominal area(m³) |
75 |
90 |
105 |
120 |
150 |
180 |
210 |
240 |
270 |
|
Inter consistency(%) |
0.8-1.2 |
||||||||
|
Qutlet consistency(%) |
3.5-4.5 |
||||||||
|
Production capacity |
ONP |
0.9-1.2 |
|||||||
|
|
AOCC |
1.5-2.4 |
|||||||
|
Motor power(kw) |
11 |
15 |
18.5 |
22 |
30 |
||||